Hobbytech has announced their new Ready to Run Spirit NXT EP 2.0 LiPo 6S 1/8th Scale E-Buggy. The model is designed for bashing and has new pivot ball front suspension design, big bore shocks, 4WD transmission, Sway Bar and the Pitbull body.

The chassis features a Konect 150Amp Waterproof ESC combined with a 2000kv brushless motor, 17kg/cm steering servo and 2.4GHz receiver. Also included in the package is the KT2S 2-channels radio. Below you can find all the details and a video showing the model’s features.

For a comfortable maintenance, the motor assembly allows an easy changing of gears and disassembly radio tray.

Brushless Konect ESC 150A Waterproof

• Sensorless brushless motors capable.
• Continue current : 150 Amp.
• Burst current : 950 Amp.
• Resistance : 0.0035Ω.
• Max motor limit : 3000Kv (4S) and 2400Kv (6S).
• NiMh input : 9 to 18 cells.
• LiPo input : 3 to 6 cells (max 14.8V).
• BEC : 6v /3A.
• Weight : 178 grams.
• Over-heat protection.
• Programmable with Program Card (not included).
• DEAN plug.

Brushless 1/8th Motor Konect  2000 Kv

• 21.6V Ni-MH and 2-6S Li-Po capable.
• Dimensions : Φ=42mm – L=74mm.
• Shaft : Φ=5mm – L=18.5mm.
• Resistance : 0,0060 Ω.
• Poles: 4.
• Amp : 4.5A.
• Weight: 412 grams.

Steering Servo Konect KN-1714

• Case: plastic.
• Dimensions: 40.7×20.5×39.5mm.
• Weight: 62 grams.
• Torque (6.0V): 17kg-cm/ Speed (6.0V): :0.14s.
• Gears: metallic.

Transmitter Konect 2.4Ghz

• CH1 and CH2 reverse servo.
• CH1 (steering) ATV (dual rate) setting potentiometer.
• CH1 and CH2 Trim setting potentiometer.
• Electronic EPA (End Point Adjustment) setting for CH1 and CH2.
• Weight : 300 grams.
• Receiver KT2S + 2 channels.
• Dimensions : 38×23.5x14mm.
• Weight : 8 grams.

Dimensions Hobbytech Spirit NXT EP 2.0

• Height : 220 mm.
• Wheelbase : 328 mm.
• Front width : 306 mm.
• Rear width : 308 mm.
• Front ride height : 53 mm.
• Rear ride height : 64 mm.
• Weight : 3210 grams.

Source: hobbytech-rc.com