Fantom RC has presented their new FR-8 Pro Competition Sensored Brushless ESC/Motor combo for 1/8th Scale Racing Car. The heart of the FR-8 Pro Speed Controller is the high-performance 32-bit CPU with proprietary firmware, providing a smooth throttle response, power, and all the adjustable parameters you expect from a competition level ESC.

Fantom ICON 4-Pole/8-Magnet Staggered Rotor motor was developed for competition at the highest level, and delivers the high torque, and ultra-smooth delivery. The motor is available in 1950kV and 2150kV variants.

Features FR-8 Pro ESC

• All R&D Done in the USA
• 1:8 Scale / 3-6 Cell / 220 Amp
• Specifically designed for the highest level of spec and mod racing
• 10awg, Ultra Low Resistance Wire
• CNC Machined Aluminum Case w/ Integrated Heat Sink
• 32-bit high-performance CPU
• Ultra-Low Resistance FET Board
• 3 Integrated Max Power Capacitors
• Heavy-Duty Solder Posts
• Precision Throttle & Brake Frequency Adjustment
• 34mm Fan w/ Aluminum Fan Cover
• Ultra Precision Throttle, Brake, and Punch Control
• Firmware Updateable with Fantom LCD Program Card
• Programmable with LCD Program Card (sold separately)
• ROAR Approval Pending

Features ICON brushless Motor

• Designed in the USA!
• 4-Pole/8-Magnet Staggered Rotor for the Ultimate Combination of Super Smooth Power, Acceleration, Punch, and Torque.
• High-Strength and Heat Resistant Magnet Formula
• Precision Dynamic Balanced Rotor
• Advanced Hall Sensing System Utilizes a Separate Magnet Ring that Insures a Clear Signal and Protects the Hall Sensing
• System from Other Signal Interference
• Precision CNC Machined Aluminum Alloy Case
• High Heat Resistant Pure Copper Wire
• Sensored and Sensorless Compatibility
• Replaceable Sensor Board
• Replaceable Rotor
• 2S to 6S LiPo/LiHV Voltage Range
• High RPM Precision Bearings
• Meets ROAR Specifications

PROGRAMMABLE PARAMETERS

• RUNNING MODE – Forward/Brake, Forward/Brake/Reverse, Forward/Reverse
• LOW VOLTAGE CUTOFF – Disable, Auto, custom 3.0v to 11.1v (0.1v increments)
• ESC OVER-HEAT PROTECTION – Disable, 3 steps
• MOTOR ROTATION – Normal, Reverse
• DEADBAND – 12 steps
• BEC OUTPUT – 6v, 7.4v
• THROTTLE:
• INITIAL POWER LIMITER – 30 steps
• THROTTLE RATE – 30 steps
• DRIVE FREQUENCY – 1K, 2K, 4K, 8K, 16K
• RPM LOCK – 1% to 100% (1% increments)
• THROTTLE CURVE – Linear, Custom
• INITIAL BRAKE – 1% to 20% (1% increments)
• DRAG BRAKE – 0% to 100% (1% increments)
• BRAKE FORCE – 0% to 100% (12.5% increments)
• INITIAL BRAKE RESPONSE – 20 steps
• BRAKE RATE – 20 steps
• BRAKE FREQUENCY – 1K, 2K, 4K, 8K, 16K
• BRAKE CURVE – Linear, Custom
• BOOST TIMING – 0° to 64° (1° increment)
• BOOST TRIGGER LEVEL – 50 steps
• BOOST TRIGGER RATE – 10 steps
• TURBO TIMING – 0° to 64° (1° increment)
• START RPM – 8,000 RPM to 50,000 RPM (1000 RPM increments)
• TURBO DELAY – Instant, 0.05 seconds to 1 second (.05 second increments)
• ACTIVATION METHOD – Full Throttle, RPM, Full Throttle + RPM
• TURBO ON RATE – 10 steps
• TURBO OFF RATE – Instant, 10 steps

Source: fantomracing.com