ProStar Racing Products revealed the first Electro-Magnetic Braking system designed for 1/8, 1/5 scale nitro RC Cars. It takes all the noise and fuss out of braking for your nitro vehicle as you enjoy backyard bashing or even winning races!
The Electro-Magnetic braking system makes it simple using only 8 parts. Eliminating up to 47 parts from the conventional brake system in a Nitro Car including multiple Linkage, Cams, Springs, screws, stops, spacers, bearings, Rods, Pads, and the large throttle brake servo.
INSTALLATION and SETUP are EASY
Simply remove your center bulkhead and differential. Re-using the stock differential and top plate, install our Universal Mag Brake and Car model-specific Adapter kit in minutes. Power is supplied using the standard 7.4vdc receiver pack with a Dean’s plug for quality on and off connection. Connect the Mag brake controller to your throttle servo, front, and rear magnets. And to the receiver. No additional channels are necessary.
Download the Free Android or IOS application, power up your car. Pair. and Adjust using our Powerful Class 1 Bluetooth, capable of up to 300feet depending on your model of phone
You can adjust the following using the app:
- Bias (Front and Rear)
- Drag Brake (Front and Rear)
- Drag Brake Duration
- Brake Curve
- Static Brake Strength (to conserve power)
- Demagnetization (if required)
- Engine Temperature Monitoring with Alarm
- Receiver battery Voltage with Alarm
- Transfer Setups to Friends between Android and Ios Users
- Quick Access to different models for example back-to-back races using the same app.
- Save up to 10 models
Source: Prostarrc.ecwid.com