Fantom RC has presented their new FR-8 Pro Competition Sensored Brushless ESC/Motor combo for 1/8th Scale Racing Car. The heart of the FR-8 Pro Speed Controller is the high-performance 32-bit CPU with proprietary firmware, providing a smooth throttle response, power, and all the adjustable parameters you expect from a competition level ESC.
Fantom ICON 4-Pole/8-Magnet Staggered Rotor motor was developed for competition at the highest level, and delivers the high torque, and ultra-smooth delivery. The motor is available in 1950kV and 2150kV variants.
Features FR-8 Pro ESC
- All R&D Done in the USA
- 1:8 Scale / 3-6 Cell / 220 Amp
- Specifically designed for the highest level of spec and mod racing
- 10awg, Ultra Low Resistance Wire
- CNC Machined Aluminum Case w/ Integrated Heat Sink
- 32-bit high-performance CPU
- Ultra-Low Resistance FET Board
- 3 Integrated Max Power Capacitors
- Heavy-Duty Solder Posts
- Precision Throttle & Brake Frequency Adjustment
- 34mm Fan w/ Aluminum Fan Cover
- Ultra Precision Throttle, Brake, and Punch Control
- Firmware Updateable with Fantom LCD Program Card
- Programmable with LCD Program Card (sold separately)
- ROAR Approval Pending
Features ICON brushless Motor
- Designed in the USA!
- 4-Pole/8-Magnet Staggered Rotor for the Ultimate Combination of Super Smooth Power, Acceleration, Punch, and Torque.
- High-Strength and Heat Resistant Magnet Formula
- Precision Dynamic Balanced Rotor
- Advanced Hall Sensing System Utilizes a Separate Magnet Ring that Insures a Clear Signal and Protects the Hall Sensing
- System from Other Signal Interference
- Precision CNC Machined Aluminum Alloy Case
- High Heat Resistant Pure Copper Wire
- Sensored and Sensorless Compatibility
- Replaceable Sensor Board
- Replaceable Rotor
- 2S to 6S LiPo/LiHV Voltage Range
- High RPM Precision Bearings
- Meets ROAR Specifications
PROGRAMMABLE PARAMETERS
- RUNNING MODE – Forward/Brake, Forward/Brake/Reverse, Forward/Reverse
- LOW VOLTAGE CUTOFF – Disable, Auto, custom 3.0v to 11.1v (0.1v increments)
- ESC OVER-HEAT PROTECTION – Disable, 3 steps
- MOTOR ROTATION – Normal, Reverse
- DEADBAND – 12 steps
- BEC OUTPUT – 6v, 7.4v
- THROTTLE:
- INITIAL POWER LIMITER – 30 steps
- THROTTLE RATE – 30 steps
- DRIVE FREQUENCY – 1K, 2K, 4K, 8K, 16K
- RPM LOCK – 1% to 100% (1% increments)
- THROTTLE CURVE – Linear, Custom
- INITIAL BRAKE – 1% to 20% (1% increments)
- DRAG BRAKE – 0% to 100% (1% increments)
- BRAKE FORCE – 0% to 100% (12.5% increments)
- INITIAL BRAKE RESPONSE – 20 steps
- BRAKE RATE – 20 steps
- BRAKE FREQUENCY – 1K, 2K, 4K, 8K, 16K
- BRAKE CURVE – Linear, Custom
- BOOST TIMING – 0° to 64° (1° increment)
- BOOST TRIGGER LEVEL – 50 steps
- BOOST TRIGGER RATE – 10 steps
- TURBO TIMING – 0° to 64° (1° increment)
- START RPM – 8,000 RPM to 50,000 RPM (1000 RPM increments)
- TURBO DELAY – Instant, 0.05 seconds to 1 second (.05 second increments)
- ACTIVATION METHOD – Full Throttle, RPM, Full Throttle + RPM
- TURBO ON RATE – 10 steps
- TURBO OFF RATE – Instant, 10 steps
Source: fantomracing.com