Archive | 1/6th

Axial: SCX6 Jeep JLU Wrangler – Big Scale Rock Crawler!

15 Oct 2021

By Speedostar in 1/6th, Axial, Horizon Hobby, Rock Crawler

Axial Racing, part of the big Horizon Hobby family, revealed the SCX6 Jeep JLU Wrangler 4WD that brings a whole new dimension to “rock crawling” and “scaling”. Based on the proven SCX10 III, the SCX6 chassis might be considered its big brother. It’s engineered for extreme durability and performance with AR90 axles. For optimal handling, the chassis has a three-link Panhard front and four-link rear suspension setup.

Fans of rock crawling, large-scale models, and Jeep vehicles alike will be thrilled with the extreme detail and high-performance functionality of the SCX6 Jeep JLU Wrangler 4WD RTR. At 1/6 scale, it takes Axial off-road adventuring to a new level.

Losi: 1/6 Super Rock Rey V2 – Brushless Rock Racer

16 Jul 2021

By Speedostar in 1/6th, Horizon Hobby, Losi

If you are a basher looking for something big, really big, Losi released the new version of the 1/6 scale Super Rock Rey. This ready-to-run takes its inspiration from full-scale rigs that tackle the King of Hammers and similar places others won’t dare go. Realistic solid axle performance joins 8S brushless power that pushes the needle to over 60 Km/h while the stability of AVC technology lets you hold nothing back through corners and jumps.

The large tires and new front end geometry increase suspension travel and improve performance over any terrain. Super Rock Rey loves rocky off-road tracks, and the rougher, the better! It also rips through sand, mud, water, and most any other surface condition.

Losi: Super Baja Ray 2.0 1/6th scale desert truck

25 Sep 2020

By Frankie in 1/6th, Losi, RC CARS

Losi have just revealed the new 1/6th-scale desert truck Super Baja Rey 2.0 based on the Super Rock Rey chassis, (designers added about an inch to the wheelbase and morphed it with the front end from the Super Baja Rey).

This desert truck mounts the Spektrum Firma SMART 160 Amp 8S ESC and 750kv Firma 1/6th 5687 brushless motor. The bottom loading chassis makes battery changes a breeze. Front and rear LED light bars keep everything nice and bright for off-road adventures at night.

Kyosho: WAVE CHOPPER 2.0 1:6 Scale RC Personal Watercraft

21 Apr 2020

By Frankie in 1/6th, Kyosho, Video

If you like water bikes you will be happy to know that Kyosho is bringing back the artfully designed Wave Chopper, originally released in 2001! The new Wave Chopper 2.0 comes with contemporary RC technology and performance, a redesigned rudder, stern tube and motor mount in the 1/6 scale hull with rider figure combines with the latest RC components and systems.

Optimal torque from the G14L water-jacketed 550—class motor works in perfect synergy with the large capacity 60A KYOSHO SPEED HOUSE KA60-91W speed controller to deliver sharp acceleration and racy performance while reducing heat loss.

Check the video below!

T-Bone Racing: THE STAND

19 Oct 2019

By Frankie in 1/10th, 1/5, 1/6th, 1/7, 1/8th, T-Bone Racing

T-Bone Racing has just released The Stand: the new premiere RC stand from that has been designed to fill the need in the 1/5th to 1/10th scale market for a portable stand that is both collapsible and very durable. This new addition to your RC garage sits at 6 3/8″ tall fully extended or at 2 1/2″ tall in it’s collapsed position.

FG Modellsport LEO 2020 Toy Fair Nuremberg 2019

02 Feb 2019

By Xtreme Racer in 1/6th, FG Modellsport, Hobby, T2M RC

Big Scale buggy fans will be happy to know that FG Modellsport at the Toy Fair 2019 presented two new versions of the LEO 2020. The model is designed for competitions and is available in 4WD and 2WD. Both are mainly composed of T7075 aluminum parts.

The chassis has a thickness of 4 mm with a very low center of gravity, uses differentials with bevel gears, cardan shafts in hardened steel and front hydraulic disc brakes in the 4WD version and central in the 2WD version.

KM Challenger 1/6 rear axle truck by Traction Hobby

27 Nov 2018

By Frankie in 1/6th, Ford, Traction Hobby

Traction Hobby revealed the first images of the 1/6 scale KM Challenger scale off-road race truck. This off road beast has been designed with a lot of attention to details for an impressive scale realism. For now this is all we got but the young Taiwanese company (it has been founded just a couple of years ago) seems to have an hit ready to hit the shelves.

Losi: Super Baja Rey brushless Desert Truck – Video

16 Nov 2018

By Speedostar in 1/6th, Desert Racer, Horizon Hobby, Losi, Video

Losi has posted a new promotional video of the Super Baja Rey 1/6th scale 4WD Desert Truck. This off-road beast is sold pre-assembled (it’s possible to choose between the RTR and the BND if you already own a Spektrum radio) and is capable of speeds up to 80+ Km/h.

The chassis of the Super Baja Rey adopts a long travel solid 4-Link rear axle and independent front A-Arm. The electronics provided with the model include a Dynamite Fuze 1200Kv brushless motor, waterproof 160A ESC (can handle 6-cells of LiPo power) and a receiver with AVC stability control (Active Vehicle Control) technology.

Older posts

Top Menu

Archive | 1/6th